User Guide

[ 21 ]
- Shown when Incoming call alert has been set to Silent and Message
alert tone to None in the currently active profile. See ‘Profiles’, p. 123.
- Indicates that the phone’s keypad is locked.
- Indicates that you have an active alarm. See ‘Clock’, p. 137.
- Indicates that Bluetooth is active. Note that, when data is
transmitted via Bluetooth, is shown.
- Indicates that all calls to the phone are forwarded. NEED PIC-
Indicates that all calls to the phone are forwarded to a voice mailbox. See
‘Settings for call forwarding’, p. 34. If you have two phone lines, the
forward indicator for the first line is and for the second line .
See ‘Line in use (network service)’, p. 46.
- Indicates that you can make calls using phone line 2 only (network
service). See ‘Line in use (network service)’, p. 46.
DATA CONNECTION INDICATORS
• When an application is establishing a data connection, one of the
indicators below blinks in standby mode.
• When an indicator is shown continuously, the connection is active.
for a data call, for a high speed data call,
is shown instead of the signal strength indicator when there is an
active GPRS connection. for when the GPRS connection is put on hold
during voice calls.
for a fax call,
for a Bluetooth connection, and
for an infrared connection.