User Guide

[ 115 ]
the network.
• Message sent as - The options are Text, Fax, Paging, and E-mail. For
further information, contact your network operator.
Note: Change this option only if you are sure that your service center is
able to convert short messages into these other formats.
• Preferred connection - You can send short messages via the normal
GSM network or via GPRS, if supported by the network. See ‘Packet
data (General Packet Radio Service, GPRS)’, p. 30.
• Reply via same ctr. (network service) - By setting this option to Yes, if
the recipient replies to your message, the return message is sent using
the same short message service center number. Note that this may
not work between all operators.
ADD A NEW SHORT MESSAGE CENTER
1 Open Message centers and select Options→ New msg. center.
2 Press , write a name for the service center and press OK.
3 Press , press and write the number of the short message
service center (Must be defined). Press OK. You need the message
center number to send short and picture messages. You can get the
number from your service provider.
To use the new settings, go back to the settings view and scroll to
Msg. center in use. Press and select the new service center.
Settings for multimedia messages
Go to Messaging and select Options→ Settings→ Multimedia message to
open the following list of settings:
• Preferred connection (Must be defined) - Select which access point is
used as the preferred connection for the multimedia message center.
See ‘Settings needed for multimedia messaging’, p. 65.
Note: If you receive multimedia message settings in a smart message
and save them, the received settings are automatically used for
the Preferred connection. See ‘Receiving smart messages’, p. 71.