User Guide

Table Of Contents

SA-130 RF coupler

The SA-130 coupler is for GSM RF Go/No Go testing. It interfaces with

the FS-52 and SS-62/CU-4 interface adapters. It allows RF function

testing in GSM bands of 850, 900, 1800 and 1900 MHz.

Note: SA-130 is not suitable for RF tuning.

For RF attenuation values, see Attenuation values for SA-130

(page 2–15).

SB-6 Bluetooth test and

interface box (sales

package)

The SB-6 test box is a generic service device used to perform Bluetooth

bit error rate (BER) testing, and establishing cordless FBUS connection

via Bluetooth. An ACP-8x charger is needed for BER testing and an

AXS-4 cable in case of cordless interface usage testing .

Sales package includes:

• SB-6 test box

• Installation and warranty information

SPS-1 Soldering paste

spreader

The SPS-1 allows spreading of solder to the LGA components pads over

the rework stencils.

SRT-6 Opening tool

SRT-6 is used to open phone covers.

RM-429

Service Tools and Service Concepts

Issue 1 COMPANY CONFIDENTIAL Page 2 –11