User Guide
Table Of Contents
- Amendment Record Sheet
- Copyright
- Warnings and cautions
- For your safety
- Care and maintenance
- ESD protection
- Battery information
- Company Policy
- Nokia 3610 fold Service Manual Structure
- 1 General information
- 2 Service Tools and Service Concepts
- 3 BB Troubleshooting and Manual Tuning Guide
- General BB troubleshooting guidelines
- Phoenix self tests
- ST_CURRENT_CONS_TEST troubleshooting
- ST_SLEEPCLK_FREQ_TEST troubleshooting
- ST_SLEEP_X_LOOP_TEST troubleshooting
- ST_UEM_CBUS_IF_TEST troubleshooting
- Power and charging troubleshooting
- Interface troubleshooting
- User interface troubleshooting
- Camera module troubleshooting
- Audio troubleshooting
- Bluetooth troubleshooting
- Baseband manual tuning guide
- 4 RF troubleshooting
- 5 System Module
- Glossary
RJ-160 Rework jig
RJ-160 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-55 stencil.
RJ-177 Soldering jig
RJ-177 is a product specific soldering jig used for soldering and as a
rework jig for the engine module. Alternatively to RJ-177 and
depending on the availability, RJ-230 Universal Soldering Jig can be
used. Both RJ-177 and RJ-230 have the same function. RJ-230 is the
preferred tool.
RJ-201 Rework jig
This jig is used in conjunction with the ST-65 stencil.
RJ-230 Soldering jig
RJ-230 is a universal soldering jig used for soldering and as a rework
jig for the engine module. Alternatively to RJ-230 and depending on
the availability, RJ-177 product specific soldering jig can be used. Both
RJ-177 and RJ-230 have the same function. RJ-230 is the preferred tool.
RJ-93 Rework jig
RJ-93 is used as a rework jig for the engine module.
This jig is used in conjunction with the ST-40 stencil for spreading the
soldering paste to the N7501 component.
RM-429
Service Tools and Service Concepts
Page 2 –10 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.