User Guide
Table Of Contents
- Amendment Record Sheet
- Copyright
- Warnings and cautions
- For your safety
- Care and maintenance
- ESD protection
- Battery information
- Company Policy
- Nokia 3610 fold Service Manual Structure
- 1 General information
- 2 Service Tools and Service Concepts
- 3 BB Troubleshooting and Manual Tuning Guide
- General BB troubleshooting guidelines
- Phoenix self tests
- ST_CURRENT_CONS_TEST troubleshooting
- ST_SLEEPCLK_FREQ_TEST troubleshooting
- ST_SLEEP_X_LOOP_TEST troubleshooting
- ST_UEM_CBUS_IF_TEST troubleshooting
- Power and charging troubleshooting
- Interface troubleshooting
- User interface troubleshooting
- Camera module troubleshooting
- Audio troubleshooting
- Bluetooth troubleshooting
- Baseband manual tuning guide
- 4 RF troubleshooting
- 5 System Module
- Glossary
Introduction
Phone description
RAP3GS is the main digital baseband ASIC in the phone. It contains functionality for GSM EDGE. Camera
hardware accelerator is used as a co-processor.
N2200 (AVILMA) is mainly the audio ASIC in the phone and N2300 (BETTY) is basically the energy management
controller for the phone.
Bluetooth is physically integrated in one single ASIC.
Key components
Function Description Item ref
Baseband ASIC AVILMA
BETTY
N2200
N2300
RF ASIC Ahneus N7505
Processor RAP3GS D2800
Co-processor Camera hardware accelerator D6601
PA GSM Front end module (FEM), quad band N7520
Oscillators VCTCXO
Balun GSM
G7501
T7502
Memories 512 Mbit NOR + 256 Mbit SDRAM Combo (Stacked with RAP3GS) D2801
Back-up battery RTC back-up battery 311 G2200
Bluetooth BTPerf 2.3 module N6030
Fold switch Hall IC switch/position sensor N2400
Battery BL-5C
Battery connector Conn. battery 3POL SPR X2000
BTB connector Board-to-board connector Main:
X3502,
Top:
X3602
RF connector X7800
RM-429
System Module
Issue 1 COMPANY CONFIDENTIAL Page 5 –5
Copyright © 2008 Nokia. All rights reserved.