User Guide

CC Technical Documentation System Module
NPM-10 (3595)
Issue 2 03/2004 ©2004 Nokia Corporation Confidential Page 13
TXQOUTP UEM Mjoelner Differential
voltage swing
2.15 2.2 2.25 Vpp Positive TX sig-
nal (program-
able voltage
swing)
DC level 1.17 1.20 1.23 V
Source imped-
ance
- - 200 W
Data clock rate - - 13 MHz
TXQOUTP UEM Mjoelner Differential
voltage swing
2.15 2.2 2.25 Vpp Positive TX sig-
nal (program-
able voltage
swing)
DC level 1.17 1.20 1.23 V
Source imped-
ance
- - 200 W
Data clock rate - - 13 MHz
TXQOUTN UEM Mjoelner Differential
voltage swing
2.15 2.2 2.25 Vpp Negative TX sig-
nal (program-
able voltage
swing)
DC level 1.17 1.20 1.23 V
Source imped-
ance
- - 200 W
Data clock rate - - 13 MHz
GENIO (28:0) General purpose I/O
GENIO5
(TXP)
UPP Mjoelner Logic "1" 1.38 - 1.80 V Transmitter
power control
enable
Logic "0" 0 - 0.4 V
GENIO6
(RESETX_MJ
OEL)
UPP Mjoelner Logic "1" 1.38 - 1.80 V Reset to RF chip
Logic "0" 0 - 0.4 V
RFAUXCONV(2:0) RF / BB analogue control signals
AUXOUT UEM Mjoelner Output voltage 0.12 - 2.50 V Transmitter
power control
Source imped-
ance
- - 200 W
Resolution - 10 - Bits
Regulators RF regulators
VBAT
(VBATREGS)
Battery PA / UEM Output voltage 2.9 3.6 4.2 V Battery cut-off
is set by UEM to
2.9 V
Table 12: BB - RF Interface Description (Continued)
Signal
Name
From To Parameter Min Typ Max Unit Notes