User Guide

NPM-10 (3595)
Disassembly/Assembly CC Technical Documentation
Page 2 ©2004 Nokia Corporation Confidential Issue 2 03/2004
Disassemble the NPM-10 (3595) Transceiver
Preparation for Disassembly
Disassembly Tools
Figure 1:
Left to right: Torque-limiting screwdriver (torque set at 28N-cm),
fiberglass soldering aid, and T6 Torx+ driver
ESD Protection
Figure 2: ESD protective wrist strap
Some form of ESD protection should be used when handling the PWB and other elec-
tronic components. Figure 2 shows a wrist strap, “which” can be grounded to a bench.
This or some other form of ESD protection should be used when handling the phone.
Assembly Instructions
To assemble the phone, follow the steps in the "Disassembly Instructions" section in
reverse order.