User Guide

CC Technical Documentation Service Tools
NPM-10 (3595)
Issue 2 03/2004 ©2004 Nokia Corporation Confidential Page 5
PKD-1 SW Security Device FLC-2 DC Cable
0750018 0730185
SW security device PKD-1 is hardware device that,
when connected to the parallel (LPT) port of the PC,
enables the use of the service software. Without the
dongle present, it is not possible to use the service
software. Printers or other peripheral devices can be
connected to the PC through the dongle, if needed.
Caution: Make sure that you have switched off the PC
and the printer before making connections!
Caution: Do not connect the PKD-1 to the serial port.
You may damage your PKD-1!
FLC-2 is used to supply a controlled operating voltage.
AXS-4 Service Cable XCS-1 Service Cable
0730090 0730218
The AXS-4 D9-D9 service cable is used to connect two
9-pin connectors (e.g., between PC and FPS-8). AXS-4
length is 2 meters.
The XCS-1 Service Cable is used to connect FLS-4 to
FLA-23.