CC Technical Documentation NPM-10 (3595) Series Transceivers Service Tools Issue 2 03/2004 Confidential ©2004 Nokia Corporation
NPM-10 (3595) Service Tools CC Technical Documentation Contents Page Service Tools.................................................................................................................. 3 NPM-10 (3595) ............................................................................................................
NPM-10 (3595) Service Tools CC Technical Documentation Service Tools NPM-10 (3595) JBV-1 Docking Station MJF-16 Docking Station Adapter 0770298 0775300 The Docking Station and the Docking Station Adapter are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by FPS-8 or an external power supply.
NPM-10 (3595) Service Tools CC Technical Documentation FLA-23 Flash Adapter GAC-4 RF Adapter 0775304 0770448 The POS Flash Loading Adapter FLA-23 is used in place of the phone’s normal battery during service, to supply a controlled operating voltage. FLA-23 also is used for flashing. GAC-4 enables RF connection. FPS-8 Flash Prommer FPS-8C Parallel Flash Prommer 0080321 0080396 The Flash Prommer FPS-8 is used for heavy flash. The Parallel Flash Prommer is used with MJF-16 and JBV-1.
NPM-10 (3595) Service Tools CC Technical Documentation PKD-1 SW Security Device FLC-2 DC Cable 0750018 0730185 SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed. FLC-2 is used to supply a controlled operating voltage.
NPM-10 (3595) Service Tools CC Technical Documentation XCS-4 Modular Cable SCB-3 DC Cable 0730178 0730114 XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. The DC Cable SCB-3 is used to connect the docking station to the charger connection (Vin) of the phone to conduct the charger calibration service procedure.
NPM-10 (3595) Service Tools CC Technical Documentation DAU-9S MBUS Cable AXP-8 Printer Cable 0730108 073000 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJS-37. The Parallel Printer Cable connects the parallel connector of the PC and the parallel input of the FPS-8.
NPM-10 (3595) Service Tools CC Technical Documentation This page intentionally left blank.
