CC Technical Documentation NPM-10 (3595) Series Transceivers Service Software Instructions Issue 2 03/2004 Confidential ©2004 Nokia Corporation
NPM-10 (3595) Service Software Instructions CC Technical Documentation Contents Page Phoenix User’s Guide .................................................................................................... 3 Introduction ..................................................................................................................3 General Setup Procedure........................................................................................... 3 Hardware Requirements for Using Phoenix..............
CC Technical Documentation NPM-10 (3595) Service Software Instructions Phoenix User’s Guide Figure 1: Phoenix introduction screen Introduction This section briefly describes how to install Phoenix and includes some basic information on how to use the program. More detailed information can be found in the Phoenix Help files. Each feature in Phoenix has its own Help file, which can be activated while running Phoenix.
NPM-10 (3595) Service Software Instructions CC Technical Documentation The installation process requires that you reboot the computer after installing the software. Phoenix is not usable until a reboot is completed. After the reboot, the Phoenix icon appears on the desktop. Double-click this icon to start the program.
CC Technical Documentation NPM-10 (3595) Service Software Instructions Installation Instructions Use the following steps to install Phoenix: 1. Insert the CD into the computer. 2. Navigate to the CD-ROM drive, and double-click the Phoenix software package. 3. Follow the on-screen prompts. 4. Reboot the computer when the installation is complete. Software Support Bundles The Phoenix installation is auto-executable.
NPM-10 (3595) Service Software Instructions CC Technical Documentation Initial Session with Phoenix It is necessary to create a connection the first time you use Phoenix. Use the following steps to create a connection: 1. Open the File menu and select Manage Connections. Figure 3: File Menu with the Manage Connections option 2. Click the Add button to create a new connection.
NPM-10 (3595) Service Software Instructions CC Technical Documentation 3. Choose one of the following on the Select mode dialog box: • Select Wizard, which allows Phoenix to auto-detect your connection configuration. • Select Manual, which allows you to manually select options to create the connection. Figure 5: Select Mode dialog box 4. Once a connection is defined, make sure that the connection you want to use appears at the top of the list.
NPM-10 (3595) Service Software Instructions CC Technical Documentation Using Profiles Phoenix’s Profile feature allows product, connection, and currently open components to be stored into permanent storage by creating a profile file with a name of your choice followed by an .nmp file extension for later retrieval. Saved profiles makes it easy to configure Phoenix into a desired configuration with favorite windows already opened and ready to go.
