Cell Phone User Guide

[ 80 ]
1
Press
Menu 8-2
(
Voice
>
Voice commands
).
2
Scroll to the menu option you wish to tag, then press
Select
.
3
Press
Options
, then select
Add command
.
4
Press
Start
. After the tone sounds, speak the voice tag clearly into the
microphone.
The phone replays then saves the recorded tag. The icon appears next
to commands which have voice tags assigned.
Use a voice command
Warning:
Do not use voice command in an emergency situation. In
emergencies, stress causes changes in your voice, which may keep
the phone from recognizing your voice command.
1
At the start screen, press and hold
Contacts
for one to two seconds. A
tone is heard and
Please speak now
is displayed.
2
After the tone, clearly speak the voice tag that you recorded previously
into the microphone.
The only other option for initiating a voice command is to press the
headset button momentarily at the start screen. The alert tones play
through the headset.
Speak the voice tag into the headset microphone. The voice tag will
playback through the headset to confirm your choice.
Work with voice tags
You can listen to an existing voice tag (in case you forgot what you
recorded), re-record a voice tag, or delete an existing tag.
1
Press
Menu 8-2
(
Voice
>
Voice commands
).
2
Scroll to the menu option you wish to tag, then press
Select
.
3
Press
Options
, scroll to either
Playback
,
Change
, or
Delete
, and
press
Select
.
Note:
If you chose
Change
, press
Start
to record again. The new
tag that is recorded replaces the old information.