CCS Technical Documentation NPD-1 Series Transceivers Service Tools Issue 1 11/2002 Nokia Corporation
NPD-1 Service Tools Page 2 CCS Technical Documentation Nokia Corporation Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Contents Page No Service Tools.................................................................................................................. 5 3585, 3570 ...................................................................................................................5 Flashing and Testing Setups ........................................................................................ 10 POS Flash Setup 1 .................................................
NPD-1 Service Tools Page 4 CCS Technical Documentation Nokia Corporation Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Service Tools 3585, 3570 Photo Code Service Tool Code Description Info JBV-1 Docking Station 0770298 The Docking Station and the Docking Station Adapter are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by FPS-8 or external power supply.
NPD-1 Service Tools Photo Page 6 CCS Technical Documentation Code Service Tool Code Description Info MJS-57 Module Jig 0770356 This jig allows phone PWB level service and troubleshooting for authorized service centers. MJS-58 Solder Jig 0770357 The soldering jig is designed to hold the PWB during repair at the component level. JBA-12 Audio Box 0770536 The JBA-12 is required for audio testing at authorized service centers.
NPD-1 Service Tools CCS Technical Documentation Photo Issue 1 11/2002 Code Service Tool Code Description Info XCS-4 Mbus/Fbus Cable 0730178 The XCS-4 Service Cable is a modular cable for flashing DCT4 products. SCB-3 DC Cable 0730114 The DC Cable SCB-3 is used to connect the docking station to the charger connection (Vin) of the phone to conduct the charger calibration service procedure.
NPD-1 Service Tools Photo Page 8 CCS Technical Documentation Code Service Tool Code Description Info XRS-4 RF Cable 0730221 The RF Cable is used for connection to the RF output on the PWB. FLS-4S POS Flash Adapter 0080543 The Point of Sale (POS) flash is a low-cost software upgrade tool. This requires the XCS-1 cable and ACP-8U for operation. DAU-9T FBUS Cable 0730267 The FBUS cable DAU-9T provides a connection from the serial port of the computer to the system connector of the phone.
NPD-1 Service Tools CCS Technical Documentation Photo Code Service Tool Code Description Info PKD-1 SW Security Device 0750018 SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed.
NPD-1 Service Tools CCS Technical Documentation Flashing and Testing Setups POS Flash Setup 1 Figure 1: View of POS flash Item Name Type Code 1 POS Flash loading adapter FLA-33 0770358 2 Service cable DKU-5F 0730281 3 AC charger ACP-8F 0680032 4 POS flash dongle FLS-4S 0080543 Software Page 10 Nokia Corporation Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Flashing, testing, and tuning with covers on (Setups 2a, 2b, 2c, 2d) Tightened performance specifications require more precise equipment and methods for testing and alignment. Manual tuning can’t provide accurate results for NPD-1 products, which means that this task has to be automated. These setups are intended to be used with either Phoenix or Darium SW. With the Phoenix SW, it is possible to do manual testing and automated tuning.
NPD-1 Service Tools CCS Technical Documentation Service Setup 2a Page 12 Item Name Type Code 1 POS flash loading adapter FLA-33 0770358 2 Power cable (included in FLA-14 sales pack) FLC-2 0730185 3 Modular cable XCS-4 0730178 4 Flash prommer box FPS-8 0080321 5 Printer cable (included in FPS-8 sales pack) 0730029 6 D9-D9 cable (included in FPS-8 sales pack) 0730090 7 Software protection key PKD-1 0750018 8 AC charger ACP-8F 0680032 Nokia Corporation Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Service Setup 2b Figure 2: Service tool setup 2b Item Name Type Code 1 Docking station Docking station adapter JBV-1 MJF-19 0770298 0770359 2 DC power cable PCS-1 0730012 3 Modular cable XCS-4 0730178 4 Flash prommer box FPS-8 0080321 5 Printer cable (included in FPS-8 sales pack) 0730029 6 D9-D9 cable (included in FPS-8 sales pack) 0730090 7 Software protection key PKD-1 0750018 8 AC charger ACP-8F 0680032 Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Service Setup 2c Figure 3: Service tool setup 2c Page 14 Item Name Type Code 1 Module jig MJS-57 0770356 2 DC power cable PCS-1 0730012 3 RF antenna cable XRF-1 0730085 4 Service MBUS cable DAU-9S 0730108 5 Software protection key PKD-1 0750018 Nokia Corporation Issue 1 11/2002
NPD-1 Service Tools CCS Technical Documentation Service Setup 2d Figure 4: Service tool setup 2d Item Name Type Code 1 Docking station JBV-1 0770298 2 Docking station adapter MJF-19 0770359 3 DC-DC cable SCB-3 0730114 4 RF antenna cable XRF-1 0730085 5 DC power cable PCS-1 0730012 6 Service MBUS cable DAU-9S 0730108 7 Software protection key PKD-1 0750018 Issue 1 11/2002 Nokia Corporation Page 15
NPD-1 Service Tools Page 16 CCS Technical Documentation Nokia Corporation Issue 1 11/2002
