User Guide

30
To access the list of dialed numbers, press the call key once in the standby
mode. To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See "1-touch
dialing," p. 53. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until
the call begins. See 1-touch dialing in "Call," p. 63.
Enhanced voice dialing
To make a call you can say the name saved in the contact list of the phone.
Voice commands are language-dependent. To set the language, see Voice
recognition language in "Phone," p. 64.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. To make a call using voice dialing, in the standby mode, press and hold
the volume down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a
list with matches is shown. The phone plays the voice command of the
match on the top of the list. If the result is not the correct one, scroll to
another entry.
Using voice commands to carry out a selected phone function is similar
to voice dialing. See Voice commands in "My shortcuts," p. 57.