Nokia Customer Care RH-21 Series Transceivers Service Tools Issue 2 07/2004 2004 Nokia Corporation.
RH-21 Service Tools Page 2 Company Confidential Nokia Customer Care 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-21 Service Tools Contents Page No Service Tools.................................................................................................................. 5 3520 .............................................................................................................................5 Flashing and Testing Setups ........................................................................................ 10 FPS-8 Flash Prommer for Heavy Flash .............
RH-21 Service Tools Page 4 Company Confidential Nokia Customer Care 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-21 Service Tools Service Tools 3520 Photo Issue 2 07/2004 Code Service Tool Code Description MJ-8 Module Jig 0770522 This jig allows phone PWB-level service and troubleshooting. Electric currents should be protected against over-voltage and over-current. FLS-4S POS Flash Adapter 0080543 The Point of Sale (POS) flash is a lowcost software upgrade tool. This requires the XCS-1 cable and ACP-8U for operation.
RH-21 Service Tools Photo Page 6 Company Confidential Nokia Customer Care Code Service Tool Code Description JBV-1 Docking Station 0770298 The Docking Station and the Docking Station Adapter (DA-32) are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector.
Company Confidential Nokia Customer Care Photo Issue 2 07/2004 RH-21 Service Tools Code Service Tool Code Description SF-35 Flash Adapter 0770868 SF-35 allows a continuous maximum power supply for the phone from an external power supply, the ACP-8. RJ-15 Soldering Jig 0770611 RJ-15 is used to hold the PWB during repair and troubleshooting. AXP-8 Printer Cable 0730298 The Parallel Printer Cable connects the parallel connector of the PC and the parallel input of the FPS-8.
RH-21 Service Tools Photo Page 8 Company Confidential Nokia Customer Care Code Service Tool Code Description CA-5S DC Cable 0730283 The DC Cable CA-5S is used to connect the docking station to the charger connection (Vin) of the phone to conduct the charger calibration service procedure. DAU-9S Mbus Cable 0730108 The Mbus Cable has a modular connector and is used with the service audio box JBA-4 or a modular T-adapter.
Company Confidential Nokia Customer Care Photo RH-21 Service Tools Code Service Tool Code Description PKD-1 SW Security Device 0750018 SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed.
RH-21 Service Tools Company Confidential Nokia Customer Care Flashing and Testing Setups FPS-8 Flash Prommer for Heavy Flash The FPS-8 flash prommer is used for heavy flashing. The sales pack product code is 0080321. FPS-8C Flash Prommer for Heavy Parallel Flash The FPS-8C flash prommer is used for heavy parallel flashing. The sales pack product code is 0080396. Page 10 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-21 Service Tools User Instructions SF-35 Follow these instructions to avoid damage to the adapter or the phone. Note: Using the adapter in any way other than described here may harm the important pins and connectors of the adapter. 1 Place the adapter in your left hand and the phone in your right hand. 2 Align the battery connecter with the battery contacts of the adapter. Gently press the phone onto the adapter (see following picture).
RH-21 Service Tools 3 Company Confidential Nokia Customer Care Press the upper end of the handset down onto the adapter until the locking mechanism engages. To remove adapter, dis-engage the locking mechanism by pulling back on the lever. Follow the reverse order as described in steps 1 through 3. Page 12 2004 Nokia Corporation.
Company Confidential Nokia Customer Care RH-21 Service Tools DA-32 Follow these instructions to avoid causing any damage to the adapter or the phone. Note: Using the adapter in any other way may harm the important pins and connectors of the adapter. 1 Place the adapter in your left hand and the phone in your right hand. 2 Let the other edge of the phone down in place. Issue 2 07/2004 2004 Nokia Corporation.
RH-21 Service Tools Page 14 Company Confidential Nokia Customer Care 3 Press down the upper end of the phone with your finger until the locking mechanism engages. 4 To remove the phone from the adapter, dis-engage the locking mechanism by pulling back on the lever. Follow the reverse order as described in steps 1 through 3. 2004 Nokia Corporation.
