Customer Care Solutions RH-9 Series Transceivers Disassembly Instructions Issue 1 11/02 ãNokia Corporation.
RH-9 Disassembly Instructions Company confidential CCS Technical Documentation Table of Contents Page No Disassembly Procedure .................................................................................................. 3 Remove Shielding Lids .................................................................................................. 6 Reassembly procedure ................................................................................................... 7 Page 2 ãNokia Corporation.
CCS Technical Documentation Company confidential RH-9 Disassembly Instructions Disassembly Procedure Table 1: 1. Release the A-cover from the bottom side of the unit. 2. Take away the A-cover. 3.Also protect the inner part of the window 4. Open the six screws in the predefined order- with a foil. The keymat is loose inside the A- with a Torx 6 driver. When re-assembling the reverse order has to be taken with a torque cover. of 28Ncm. 5.
RH-9 Disassembly Instructions Company confidential CCS Technical Documentation Table 2: 9. Remove the metal frame. 10. If you hold the UI module upside down, the speaker drops out of its hollow. 11. The next step is to take out the RadioModule EY1A. Take care of LEDs.1 13. Remove the power key. 12. Lift up the Battery Connector with your fingers. You can use the SRT-6 opening tool. 14. To loosen the System Connector you can use the SRT-6 opening tool.
CCS Technical Documentation Company confidential RH-9 Disassembly Instructions Table 2: 17. The SALT speaker is taped to the D-cover and can be removed with a straight bladedscrewdriver. 19. Remove the SIM card support this way. 18. If you need to change the VIBRA motorstrong tweezers or pliers can be taken. 20. The Release Spring is locked on two sides. Use a screwdriver to unlock the two snaps 21. After releasing the two hooks, you can remove the Release Springs easily.
RH-9 Disassembly Instructions Company confidential CCS Technical Documentation Remove Shielding Lids Table 3: 23. When working with PWB, always use repair Jig. 22. Remove Shielding Lids. Do not reuse shielding lid once it is removed. Page 6 ãNokia Corporation.
CCS Technical Documentation Company confidential RH-9 Disassembly Instructions Reassembly procedure Reassembly takes place in reversed order compared with disassembly. Issue 1 11/02 ãNokia Corporation.
RH-9 Disassembly Instructions Company confidential CCS Technical Documentation [This page left intentionally blank] Page 8 ãNokia Corporation.