PAMS Technical Documentation NHM-8NX Series Transceivers Accessories Issue 1 05/02 ãNokia Corporation
NHM-8NX Accessories PAMS Technical Documentation Table of Contents Page No BLC-2 Standard Battery................................................................................................. 4 Product Code ...............................................................................................................4 ACP-7 Standard Charger ............................................................................................... 5 Product Codes ...................................................
PAMS Technical Documentation NHM-8NX Accessories List of Figures Fig 1 View of the BLC-2 Standard Battery ........................................................................4 Fig 2 View of the ACP-7 Standard Charger .......................................................................5 Fig 3 View of the ACP-8 Travel Charger...........................................................................6 Fig 4 View of the DCV-10 Desktop Stand ..............................................................
NHM-8NX Accessories PAMS Technical Documentation BLC-2 Standard Battery The BLC-2 is a Li-ion type battery in a white plastic package.
NHM-8NX Accessories PAMS Technical Documentation ACP-7 Standard Charger The standard charger is available for different voltage levels and comes with different wall plugs. The standard charger can also be used as a power supply for the desktop stand.
NHM-8NX Accessories PAMS Technical Documentation ACP-8 Travel Charger Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Performance Travel Charger is practically current independent in normal office and household use. Like the standard charger, it is available for different wall sockets. The Travel Charger can also be used with the desktop stand.
NHM-8NX Accessories PAMS Technical Documentation ACP-12 Travel Charger The ACP-12 travel chargers are small and light weightr, high performance chargers. They are multivoltage (90 –264V) chargers, which also fullfil the long run EU Code of conduct requirement on efficiency with low standby power consumption (< 300mW). The chargers have a fixed cable with Velcro cable management. Product Code ACP-12 Travel Chargers: ACP-12E Europe: ACP-12X UK: ACP-12U USA:.
NHM-8NX Accessories PAMS Technical Documentation DCV-10 Desktop Stand The desktop stand provides a convenient way to charge the phone in the upright position on a table. Figure 4: View of the DCV-10 Desktop Stand Product Code DCD-1 Desktop stand: 0272865 Specification Connections: 3.5 mm DC jack (ACP-7, ACP-8 or ACP-12) DDC-1 Battery Charging Stand The DDC-1 Battery Charging Stand provides users the possiblity of charging a spare battery .
NHM-8NX Accessories PAMS Technical Documentation LCH-9 Mobile Charger A green light indicates that the cigarette lighter charger is ready for charging. Check the charging status on the phone display. The input voltage can be from 11 or 32 V DC, negative grounding. Figure 6: View of the LCH-9 Mobile Charger Product Code LCH-9 Mobile charger: 0675120 Specification Connectors • input: D 21/23 mm • output: 3.5 mm DC plug Protection: input fused, output current limit 850 mA Voltage • input: 11...
NHM-8NX Accessories PAMS Technical Documentation PPH-1 Plug-in HF Car Kit The PPH-1 provides rapid charging for the phone and possibility for HF operation. The PPH-1 plug and play handsfree unit is connected directly to the cigarette lighter in a car. PPH-1 is connected to the mobile phone with the cable. The cable has combined connector with charger- and headset connectors. Figure 7: View of PPH-1 Plug-in HF Car Kit Product Code Headset PPH-1: 0272170 Specification Output connectors: 3.
NHM-8NX Accessories PAMS Technical Documentation MBC-6 Mobile Holder The MBC-6 Mobile Holder is used in vehicle to hold the phone. Attaching can be done using a swivel or mounting plate.
NHM-8NX Accessories PAMS Technical Documentation HHS-9 Swivel Mount The HHS–9 swivel mounting plate provides an alternative (to MKU–1) method of fixing the MBD-10 Mobile Holder.
PAMS Technical Documentation NHM-8NX Accessories HFM-8 Handsfree Microphone The HFM-8 microphone can be used together with PPH-1 Plug-in Car Kit.
NHM-8NX Accessories PAMS Technical Documentation HDC-5 Headset The HDC-5 headset also provides a hook switch for the answer/end call button.
PAMS Technical Documentation NHM-8NX Accessories HDB-5 Boom Headset The HDB-5 boom headset has basic the handsfree functionality with an answer/end button. It is a trendy and modern "over the ear" -concept, is small and lightweight and has excellent audio quality.
NHM-8NX Accessories PAMS Technical Documentation HDD-1 Dual Headset The HDD-1 dual headset has a clip to hold it conveniently in place, and a remote control with a microphone and an answer/end button.
NHM-8NX Accessories PAMS Technical Documentation CARK 134 Active Carkit (including MCC-7) The CARK 134 Active Carkit has the following features: • • • • • • handsfree audio mobile Holder keep the phone firmly in place External antenna connectivity charging car radio mute noise and echo cancellation Product Code CARK 134: 0085179 (E&A) 0085193 (US) 0080381(US) 0085186 (APAC) Figure 14: Parts of CarKit 134 HFS-12 HFU-5 MCC-7 HFM-8 HHS-9 MKU-1 Issue 1 05/02 ãNokia Corporation Page 17
NHM-8NX Accessories PAMS Technical Documentation LPS-3 Loopset The LPS-3 Loopset has been developed for hearing aid users to allow them to use mobile phones. It is based on induction technology. All hearing aids have support for induction loop, that is, they have a little tele-coil inside. This coil can capture the signal supplied to the loop. Standard hearing aids have two operation modes: (1) the M-mode for normal microphone use and (2) the T-mode for tele-coil.
