PAMS Technical Documentation NHM-8NX Series Transceivers Service Software Instructions & Service Concepts Issue 1 05/02 ãNokia Corporation
NHM-8NX Service Software Instructions & Service Concepts Table of Contents PAMS Technical Documentation Page No Service Software Instructions ........................................................................................ 3 Phoenix ........................................................................................................................3 Supported Operating Systems ...................................................................................
PAMS Technical Documentation NHM-8NX Service Software Instructions & Service Service Software Instructions Phoenix Phoenix is the next generation Service Software and it has been designed to meet the challenges in servicing modern cellular phones. The Phoenix program has been build using component architecture. This means that the actual program is small and most of the program’s functionality is divided into dynamically loaded modules or DLLs.
NHM-8NX Service Software Instructions & Service Concepts PAMS Technical Documentation Introduction This section briefly describes how to install the Phoenix software and includes some basic information on how to use the program. For more detailed information, please refer to the Phoenix’s Help -files. Each feature in Phoenix has its own Help function, which can be activated while running the program. Press the F1 key or the feature's Help-button to activate a Help -file.
PAMS Technical Documentation NHM-8NX Service Software Instructions & Service Uninstalling Phoenix Uninstalling another Phoenix version 1 Make sure that the dongle is attached. 2 Go to the Control Panel and select Add/Remove Programs. 3 Select TSS4 Phoenix Release xx.yy.zzz for uninstallation and click Add/Remove. 4 Click OK to remove the application You may be required to reboot your PC after uninstallation.
NHM-8NX Service Software Instructions & Service Concepts PAMS Technical Documentation nection setup dialog. Selecting a product Many of Phoenix’s features are product-specific. It is, therefore, mandatory to choose the product you will be working on at the beginning of the session. 1 Select File - Scan Product (or hold the Ctrl key down and press R). Phoenix will scan the connected product and load additional menus which are designed for the product.
NHM-8NX Service Software Instructions & Service PAMS Technical Documentation Service Concepts and Setup Instructions Flash Concept Figure 1: Flash Concept 7 9 8 6 5 4 3 2 1 Table 4: Flash Concept Item Name Type Code 1 Point of Sales flash loading adapter FLA-23 0775304 2 Power cable FLC-2 0730185 3 Modular Cable XCS-4 0730178 4 Flash prommer box FPS-8 0080321 5 Printer cable, incl. in FPS-8 sales package 6 D9 - D9 cable, incl.
NHM-8NX Service Software Instructions & Service Concepts PAMS Technical Documentation Flash Concept - POS (Point-of-Sale) Figure 2: Flash Concept - Point-of-Sale 4 5 2 3 1 Table 5: POS Flash Concept ITEM NAME TYPE CODE 1 Point-of-Sales flash loading adapter FLA-23 0775304 2 Service Cable XCS-1 0730218 3 AC Charger (see General Information) ACP-8 4 POS flash dongle for E/A area POS flash dongle for APAC area FLS-4 5 Phoenix Service SW Phoenix Service Software in CD-ROM 8406941 0775
NHM-8NX Service Software Instructions & Service PAMS Technical Documentation JBV-1 Flash Concept Figure 3: JBV-1 Flash Concept 7 9 8 6 5 4 3 2 1 Table 6: JBV-1 Flash Concept ITEM NAME TYPE CODE 1 Docking station Docking station adapter JBV-1 MJF-16 0770298 0775300 2 DC power cable PCS-1 0730012 3 Modular cable XCS-8 0730178 4 Flash prommer box FPS-8 0080321 5 Printer cable, incl. in FPS-8 sales package 6 D9 - D9 cable, incl.
NHM-8NX Service Software Instructions & Service Concepts PAMS Technical Documentation Jig Concept Figure 4: Jig Concept 5 6 1 2 4 3 Note: By default, the MJS-37 is intended for use with an external power supply. However, it can be modified to use FPS-8 as the power supply. See the MJS-37 schematic for more information.
NHM-8NX Service Software Instructions & Service PAMS Technical Documentation Service Concept Figure 5: Service Concept 8 9 7 5 4 6 1 Table 8: Service Concept ITEM NAME TYPE CODE 1 Docking station JBV-1 0770298 2 Docking station adapter MJF-16 0775300 4 DC-DC cable SCB-3 0730114 5 RF antenna cable XRF-1 0730085 6 DC power cable PCS-1 0730012 7 Service MBUS cable DAU-9S 0730108 8 Software protection key PKD-1 0750018 9 Phoenix Service Software Phoenix Service Software
NHM-8NX Service Software Instructions & Service Concepts PAMS Technical Documentation Parallel Flash Concept Figure 6: Parallel Flash Concept Test consept pippi VP 03-04-02 Table 9: Parallel Flash Concept ITEM NAME TYPE CODE 1 Docking station adapter MJF-16 0775300 2 Docking station JBV-1 0770298 3 Modular cable XCS-8 0730178 4 DC power cable PCS-1 0730012 7 D9 - D9 cable, incl. in FPS-8 sales package AXS-4 0730090 8 Printer cable, incl.
