User Guide
Table Of Contents
- Amendment Record Sheet
- Copyright
- Warnings and cautions
- For your safety
- Care and maintenance
- ESD protection
- Battery information
- Company Policy
- Nokia 3500c Service Manual Structure
- 1 General information
- 2 Service Tools and Service Concepts
- 3 BB Troubleshooting and Manual Tuning Guide
- Baseband troubleshooting overview
- Power and charging troubleshooting
- Interface troubleshooting
- User interface troubleshooting
- Audio troubleshooting
- Introduction to acoustics troubleshooting
- Audio troubleshooting test instructions
- Earpiece troubleshooting
- Internal earpiece troubleshooting
- External headset earpiece troubleshooting
- IHF troubleshooting
- IHF troubleshooting
- Microphone troubleshooting
- Internal microphone troubleshooting
- External headset microphone troubleshooting
- Connections troubleshooting
- Baseband manual tuning guide
- 4 RF Troubleshooting and Manual Tuning Guide
- 5 System module
- Glossary
Figure 15 BER test result
Bluetooth self tests in Phoenix
Steps
1. Start
Phoenix
service software.
2. ChooseFile→Scan Product.
3. Place the phone to a flash adapter.
4. From the Mode drop-down menu, set mode to Local.
5. Choose Testing→Self Tests.
6. In the
Self Tests
window check the following Bluetooth related tests:
• ST_LPRF_IF_TEST
• ST_LPRF_AUDIO_LINES_TEST
• ST_BT_WAKEUP_TEST
RM-272; RM-273
BB Troubleshooting and Manual Tuning Guide
Issue 1 COMPANY CONFIDENTIAL Page 3 –37
Copyright © 2007 Nokia. All rights reserved.