User Guide
Table Of Contents
- Amendment Record Sheet
- Copyright
- Warnings and cautions
- For your safety
- Care and maintenance
- ESD protection
- Battery information
- Company Policy
- Nokia 3500c Service Manual Structure
- 1 General information
- 2 Service Tools and Service Concepts
- 3 BB Troubleshooting and Manual Tuning Guide
- Baseband troubleshooting overview
- Power and charging troubleshooting
- Interface troubleshooting
- User interface troubleshooting
- Audio troubleshooting
- Introduction to acoustics troubleshooting
- Audio troubleshooting test instructions
- Earpiece troubleshooting
- Internal earpiece troubleshooting
- External headset earpiece troubleshooting
- IHF troubleshooting
- IHF troubleshooting
- Microphone troubleshooting
- Internal microphone troubleshooting
- External headset microphone troubleshooting
- Connections troubleshooting
- Baseband manual tuning guide
- 4 RF Troubleshooting and Manual Tuning Guide
- 5 System module
- Glossary
XCS-4 Modular cable
XCS-4 is a shielded (one specially shielded conductor) modular cable
for flashing and service purposes.
XRE-2 Bluetooth cable
The bluetooth cable connects the bluetooth connector of the module
jig to the bluetooth test box JBT-9.
XRS-6 RF cable
The RF cable is used to connect, for example, a module repair jig to
the RF measurement equipment.
SMA to N-Connector approximately 610 mm.
Attenuation for:
• GSM850/900: 0.3+-0.1 dB
• GSM1800/1900: 0.5+-0.1 dB
• WLAN: 0.6+-0.1dB
RM-272; RM-273
Service Tools and Service Concepts
Page 2 –14 COMPANY CONFIDENTIAL Issue 1
Copyright © 2007 Nokia. All rights reserved.