Cell Phone User Guide

15
[ 76 ]
2
Press
Select
and scroll to a set of connection settings.
For example:
Set 1
.
3
Press
Options
and scroll to
Edit
.
4
Scroll to each of the settings and enter information as shown below.
Make all the required settings one by one. For appropriate settings,
contact your network operator or service provider.
•
Homepage
: Enter the homepage address of the WAP service you want
to use and press
OK
.
•
Connection type
: Scroll to
Continuous
or
Temporary
and press
Select
.
•
Connection security
:
Scroll
to
On
or
Off
and press
Select
.
When the connection security is on, the phone tries to use a secure
connection with the WAP service. If a secure connection is not
available, the connection will not be made. If you want to connect
anyway with a non-secure connection, set the connection security
to
Off
.
•
Dial-up number
: Enter the number and press
OK
.
•
IP address
: Enter the address and press
OK
.
•
Authentication type
: Scroll to
Secure
or
Normal
and press
Select
.
•
Data call type
: Scroll to
Analog
or
ISDN
and press
Select
.
•
User name:
Enter the user name and password and press
OK
.
•
Password:
Enter your password and press
OK
.
5
After you have made all the required settings, you can change the
set’s name. Press and then
Options
, scroll to
Rename
, and press
Select
. Enter the name and press
OK
.
Activate the settings
1
Press
Menu
11, scroll to
Settings
and press
Select
.
Connection settings
appears.
2
Press
Select
and scroll to the appropriate set. For example:
Set 1