Programmes After Market Services NPW-1 Series Transceivers Service Software Instructions Issue 1 10/01 ãNokia Corporation
NPW-1 Service Software Instructions PAMS Technical Documentation Table of Contents Page No Phoenix........................................................................................................................... 3 Introduction ..................................................................................................................3 Setting up Phoenix .......................................................................................................
NPW-1 Service Software Instructions PAMS Technical Documentation Phoenix Introduction This section briefly describes how to install the Phoenix software and includes some basic information on how to use the program. For more detailed information, please refer to the Phoenix’s Help -files. Each feature in Phoenix has its own Help function, which can be activated while running the program. Press the F1 key or the feature's Help-button to activate a Help -file.
NPW-1 Service Software Instructions PAMS Technical Documentation Table 2: Recommended HW for Windows 2000 Recommended HW for Windows 2000 Processor 700 Mhz RAM 512 MB Needed disk space 50 - 100 MB Table 3: Supported Operating Systems Supported Operating Systems Windows 95 Windows 98 Windows NT 4.0 Windows 2000 Installing Phoenix 1 Before you start installing the program, check that • the dongle is attached to the parallel port. Contact your supervisor in order to obtain a suitable dongle.
PAMS Technical Documentation NPW-1 Service Software Instructions Note: If you have different product packages installed, the components are uninstalled only if they are not included in other product packages. Data Packages Data Packages (DP) is a name for a helpful feature in the Phoenix software. This type of feature provides a flexible way of distributing and installing Phoenix and its data files. All product-specific data is separated from the program code and installed separately.
NPW-1 Service Software Instructions PAMS Technical Documentation Choose Product. You will be presented with a list of available products. After the product selection, you will see an additional menu item on the main menu. If you take a look at the available menu items, you will see that their number has increased. Phoenix environment You can configure the program’s main toolbar and the product or tool -specific options to your liking.