Programmes After Market Services NPW-1 Series Transceivers Service Tools Issue 1 10/01 ãNokia Corporation
NPW-1 Service Tools PAMS Technical Documentation Table of Contents Page No Module Jig (MJS-18, 0770299) ...................................................................................5 Product Code ............................................................................................................. 5 POS Dongle (FLS-4, 0774263) ...................................................................................6 Product Code .....................................................................
PAMS Technical Documentation NPW-1 Service Tools Service tool setup 2a ............................................................................................... 29 Service tool setup 2b ............................................................................................... 29 Service tool setup 2c ............................................................................................... 30 Flashing and testing with covers off (Setup 3) ...................................................
NPW-1 Service Tools PAMS Technical Documentation List of Figures Page No Fig 1 View of Module Jig MJS-18 ......................................................................................5 Fig 2 View of POS Dongle, FLS-4......................................................................................6 Fig 3 View of Flash Prommer for heavy flash, FPS-8.........................................................7 Fig 4 View of Flash Prommer for heavy parallel flashing ................................
NPW-1 Service Tools PAMS Technical Documentation Module Jig (MJS-18, 0770299) This jig allows phone PWB -level service and troubleshooting. Electric circuits have to be protected against over-voltage and over-current. Product Code MJS-18: 0770299 Figure 1: View of Module Jig MJS-18 Table 1: Spare parts for MJS-18 Item Description Type Designation Code Supplier 1 Fuse T2A 5x20 2 Test prope GSS-19-3.
NPW-1 Service Tools PAMS Technical Documentation POS Dongle (FLS-4, 0774263) The POS flash concept needs the Flash Adapter and cable between the phone and the FLS-4.
PAMS Technical Documentation NPW-1 Service Tools FPS-8 Flash Prommer for heavy flash (0080321, sales pack) The FPS-8 flash prommer is used for heavy flashing.
NPW-1 Service Tools PAMS Technical Documentation FPS-8C Flash Prommer for heavy parallel flash (0080396) The FPS-8C Flash Prommer is used for heavy parallel flashing.
PAMS Technical Documentation NPW-1 Service Tools Docking Station (JBV-1, 0770298) and Docking Station Adapter (MJF-2, 0770300) The Docking Station and Docking Station Adapter are needed for Mbus, Fbus, RF and Audio connections. This setup allows a connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by the FPS-8 or an external power supply.
NPW-1 Service Tools PAMS Technical Documentation Galvanic Contact (GAC-1, 0770301) The GAC-1 adapter is needed for the RF connection. The GAC-1 adapter makes galvanic connections to assembled handset RF-switches possible. Via this adapter, the handset is connected to the RF measuring and test equipment. Note: Unnecessary usage of the handset’s RF-switch must be avoided.
PAMS Technical Documentation NPW-1 Service Tools Coupler (CPL-1, 0770287) The Coupler has been developed for antennas’ go/no go testing. Note: Tuning is not allowed with the CPL-1.
NPW-1 Service Tools PAMS Technical Documentation Audio box (JBA-8, 0770320) The Audio Box is needed for audio connections. The box must support DCT4 Janette audios. Service Audio box JBA-8. The Service Audio box provides an interconnection between the phone’s system connector (XEAR, XMIC) through a fixed audio cable and Audio tester with a BNC-BNC coax.The cConnection to a PC can be made with the service battery, through a DAU-9 cable. The Service Audio Box JBA-8 is used for service purposes.
PAMS Technical Documentation NPW-1 Service Tools Audio Cable (ADS-4, 0730222) The Service Cable between the phone and the Service Audio Box.
NPW-1 Service Tools PAMS Technical Documentation Mbus/Fbus Cable (XCS-4, 0730178) The Mbus/Fbus cable connects the phone and the flash box.
PAMS Technical Documentation NPW-1 Service Tools Flash Adapter (FLA-13, 0770297) The Flash Adapter allows a continuous maximum power supply for the phone from an external power supply: the ACP-8. The service battery allows Mbus/Fbus connections. The Flash Adapter must be protected against over-voltage, over-current and cross-connections. The Flash Adapter has to be regulated. Note: The Flash Adapter is not to be used for handset testing, and is only meant for flashing.
NPW-1 Service Tools PAMS Technical Documentation Soldering Jig (MJS-27, 0775287) The Soldering Jig is used to hold the PWB during repair and troubleshooting.
PAMS Technical Documentation NPW-1 Service Tools Printer Cable (AXP-8, 073F000) The Parallel Printer Cable connects the parallel connector of the PC and the "PARALLEL INPUT" of FPS-8 or FPS-8C.
NPW-1 Service Tools PAMS Technical Documentation D9-D9 Cable (AXS-4, 0730090) The D9-D9 cable AXS-4 is used to connect two 9 pin D connectors, for example, between a PC and a TDF-4 security box.
PAMS Technical Documentation NPW-1 Service Tools Audio Cable (ADS-3, 0730197) The Audio Cable connects to the Audio box JBA-6.
NPW-1 Service Tools PAMS Technical Documentation DC Cable (SCB-3, 0730114) The DC Cable SCB-3 is used to connect the Service Battery to the charger connection Vin of the phone when doing the charger calibration service procedure.
PAMS Technical Documentation NPW-1 Service Tools MBUS Cable (DAU-9S, 0730108) The MBUS Cable DAU-9S has a modular connector, and is used with the service Audio Box JBA-4 or a modular T-adapter.
NPW-1 Service Tools PAMS Technical Documentation Power Cable (PCS-1, 0730012) The Power Cable PCS-1 is used to connect the JBT-1 and JBS-19 module jigs to an external power supply. It can also be used with FPS-4.
PAMS Technical Documentation NPW-1 Service Tools RF Cable (XRF-1, 0730085) The XRF-1 RF cable is used to connect the MJS-9 Test frame to the RF measurement equipment.
NPW-1 Service Tools PAMS Technical Documentation Service Cable (XCS-4, 0730178) The XCS-4 Service Cable is a modular cable for flashing DCT4 products.
PAMS Technical Documentation NPW-1 Service Tools Power Pack, (DDC-10, 0670405) The Power Pack is designed to provide the phone with power via FLA-13. The phone’s own battery can be used in DDC-10. Note: DDC-10 allows battery charging. When it is used as a charger, the power pack need to be disconnected. Note: When DDC-10 is used as a Power Pack, battery charging is not allowed! Figure 22: DDC-10 Power Pack Figure 23: View of Power Pack, DDC-10 Note: Do not plug in cable in charger receptacle.
NPW-1 Service Tools PAMS Technical Documentation SW Security Device (PKD-1, 0750018) The SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of a PC. Without the dongle present it is not possible to use the service software. A printer or any such device can be connected to the PC through the dongle, if needed. Caution: Make sure that you have switched off the PC and the printer before making connections.
NPW-1 Service Tools PAMS Technical Documentation Flashing and Testing Setups POS flash (FLS-4, 0081482 - Setup 1) This setup is made for the Point-of-Sale but it can also be used in service centers. The purpose of this is to make flashing as easy as possible at the POS’s and prevent the unnecessary handset flow to service.
NPW-1 Service Tools PAMS Technical Documentation Flashing, testing and tuning with covers on (Setups 2a, 2b and 2c) Tightened performance specifications require more precise equipment and methods for testing and alignment. Manual tuning cannot provide accurate results for NPW-1 products, which means that this task has to be automated. These setups are intended to be used with either Phoenix or Darium SW. With the Phoenix SW it is possible to do manual testing and automated tuning.
PAMS Technical Documentation NPW-1 Service Tools Service tool setup 2a This setup is for testing and tuning (RF testing and tuning is not possible) and EM (Energy Management) calibration. When EM calibration is being done, the JBV-1 needs to by powered by 12V from an external power supply. EM calibration can also be done by connecting the JBV-1 to a PC using a DAU-9S cable. Figure 26: Service tool setup 2a Service tool setup 2b With this setup, RF testing and tuning is possible.
NPW-1 Service Tools PAMS Technical Documentation Service tool setup 2c This setup makes antenna go/no go testing possible.
NPW-1 Service Tools PAMS Technical Documentation Flashing and testing with covers off (Setup 3) Table 4: Service Tool setup 3 ITEM NAME TYPE CODE 3. Service cable XCS-4 0730178 4. DC cable PCS-1 0730012 6. Flash loading adapter FPS-8 0080321 7. D9–D9 Cable AXS-4, (included in FPS-8C sales pack 0730090 8. Printer cable, IEEE1284 Parallel Cable AXP-8 (included in FPS-8C sales pack) 073F000 9. AC charger ACF-8 (included in FPS-8 sales pack) 0680032 10.
NPW-1 Service Tools PAMS Technical Documentation Parallel Flash (Setup 4) The Parallel Flash setup allows flashing eight individual handsets at the same time. This requires the PC to fulfil the following requirements: the PC has to have two physical serial ports (COM1 and COM2). Service tool setup 4 Table 5: Service tool setup 4 ITEM NAME TYPE CODE 1. Docking Station JBV-1 0770298 2. Docking Station Adapter MJF-2 0770300 3. Service cable XCS-4 0730178 4. DC cable PCS-1 0730012 7.
NPW-1 Service Tools PAMS Technical Documentation Warranty and user data transfer (Setup 5) This setup is for Warranty Data and User Data transfer from phone to phone. Service tool setup 5: Table 6: Service tool setup 5 ITEM NAME TYPE CODE 3. Service cable XCS-4 0730178 18. Travel charger ACP-8U (two) 0675196 19.
NPW-1 Service Tools PAMS Technical Documentation This page intentionally left blank.
