User Guide

NPC-1
Assembly & Disassembly Instructions PAMS Technical Documentation
Page 6 ãNokia Corporation Issue 1 10/01
14.
Remove the release spring.
Step 11. Use a flat-headed screwdriver to remove
the release spring from the D-cover.
The heat staking features will break during
disassembly.
Note: The broken heat staking features will not prevent replacing a new release spring
15.
Remove the vibra assembly.
Step 12. Lift the vibra assembly from its slot.
Use a screwdriver or your finger.
16.
Remove the buzzer assembly.
Step 13. Place a screwdriver with a chisel-point
between the buzzer assembly and the
D-cover.
Step 14. Lift the buzzer assembly.
The heat staking features will break during
disassembly.
Note: The broken heat staking features will not prevent the use of the buzzer.
17.
Remove the metal deck.
Step 15. Release the four side locks with a
screwdriver.
Step 16. Push the metal deck from the engine’s side.
Note: Do not reuse the metal deck after disassembly.
or buzzer onto the cover.