Customer Care Solutions Technical Documentation SERVICE MANUAL NEM-2 Cellular Phones Issue 1 NMP Part No: 0275721 Nokia 3300 (b) COMPANY CONFIDENTIAL Issue 1 07/03 Copyright 2003 Nokia Corporation.
Customer Care Solutions Technical Documentation Amendment Record Sheet Amendme nt No Issue 1 07/03 Date Inserted By Comments 03/03 TSa First draft 07/03 TSa First issue Copyright 2003 Nokia Corporation.
Customer Care Solutions Technical Documentation Nokia NEM-2 Service Manual Structure 1. Foreword 2. General Information 3. Parts List 4. Service SW Instructions and Service Concepts 5. Service Tools 6. LGA Rework Instructions 7. Disassembly and Assembly Instructions 8. Troubleshooting 9. System Module and User Interface 10. Accessories 11. Schematics Issue 1 07/03 Copyright 2003 Nokia Corporation.
Customer Care Solutions Technical Documentation IMPORTANT This document is intended for use by qualified service personnel only. Company Policy Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA CORPORATION should be notified in writing.
Customer Care Solutions Technical Documentation Warnings and Cautions Please refer to the phone's user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: 1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI-SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION.
Customer Care Solutions Technical Documentation ESD Protection Nokia requires that phone repair places have sufficient ESD protection (against static electricity) when servicing cellular phones. A cellular phone, which is ready for use, can be handled normally without ESD protection. The SIM card and battery can be replaced in normal conditions of use. To replace the color cover ESD protection must be applied, except for the phone covers which can be replaced by the customer.
