User Guide

NEM-2 Company confidential

CCS Technical Documentation

Service Tool Concept for RF Tuning Operations

• RF tuning setup must be carried out with JXS-2 and DA-1.

• Power to JBV-1 must be supplied from an external DC power supply, not

FPS-

8 prommer

• JBV-1 input voltage: Nominal input for RF tuning is +3.9 V DC

• Remember the cable attenuation when setting required RF levels

• DA-1 losses must be taken from the DA-1 label

Note! JBV-1 Docking Station stays outside the box. This is a Rhode&Schwartz CMU

Z11 shielded chamber modified to place the dockingadapter inside the box.

Figure 1: Service tools concept

Item: Type: Service accessory: Product code:

1 JBV-1 Docking station 0770298