Manualshelf

User Guide

ManualsBrandsNokia ManualsCell Phone3300
31323334353637383940
NEM-2 Company confidential
CCS Technical Documentation
Page 36 Copyright Nokia. All rights reserved. Issue 1 07/03
FPS-8/FLS-4S USB driver installation for NEM-X
1. Connect the phone to the FPS8/FLS-4S and to the USB port and switch it on.
NOTICE: If you connect a NEM-X without a MMC card to the PC for the first time, a “USB
device“ is installed with an error. Ignore this error and press the “Finish” button to close
the window.
2. Start Phoenix and initiate the product scan.
3. Select Flashing -> FPS8 Flash. Now the correct Flash window should open. It has an
additional file selection for the ADSP file.