User Guide

MJ-55 Module jig 0780413

The MJ-55 module jig is used for testing the following modules:

• User interface

• Baseband and RF on system module

Note: The nominal supply voltage for MJ-55 is +4.0V. The supply

voltage must not exceed +6.5V (min. 3.0V).

•

Spare flex unit 0780546

Spare UI unit 0780547

PCS-1 Power cable 0730012

The PCS-1 power cable (DC) is used with a docking station, a module jig

or a control unit to supply a controlled operating voltage.

PKD-1 SW security device 0750018

SW security device is a piece of hardware enabling the use of the service

software when connected to the parallel (LPT) port of the PC.

Without the device, it is not possible to use the service software.

Printer or any such device can be connected to the PC through the device

if needed.

Caution: Do not connect the PKD-1 to the serial port.

RM-51

Nokia Customer Care Service Tools

Page 4–10 Company Confidential 9238460 (Issue 1)