User Guide

5. Make sure the dongle is connected and start Phoenix.

6. In Phoenix, choose: File -> Open Product -> RM-51 Product Menu.

7. Select Testing -> RF Controls.

8. In the toolbar: set Operating Mode to Local.

9. Select Band: GSM900, GSM1800 or GSM1900.

10. Set Operation Mode to Burst.

11. Set Active Unit to Tx.

12. Set Tx Data Type to All 1.

13. Set Rx/Tx Channel to 37 for GSM900, 700 for GSM1800, or 661 for GSM1900.

14. Set Tx PA Mode to Free.

15. Set Tx Power Level to 5 for GSM900, otherwise to 0.

Results

Phoenix should now look like this:

Figure 137 Preparing for transmitter troubleshooting

RM-51

RF troubleshooting Nokia Customer Care

9238460 (Issue 1) Company Confidential Page 7–23