User Guide

18. Earpiece can be removed by pushing it out from its guidance by using a Torx screwdriver. If it is necessary

to replace the Earpiece always use a new Earpiece Adhesive. Note the guide pin when re-assembling.

19. Use SRT-6 to disconnect the Flex Module carefully.

20. Remove the UI-Board Assy. Note: The UI-Board Assy and the Shield are only available as single spare parts.

They do not to be glued in after sales.

21. Remove the Engine Module.

RM-51

Disassembly and reassembly instructions Nokia Customer Care

9238460 (Issue 1) Company Confidential Page 5–9