User Guide

Nokia Custome Care Service Sofftware and Tuning Instructions
RH-37
Issue 1 07/04 Nokia Corporation Page 69
Edit the column <Loss/dB>.
Note: Jig and product are pre-defined.
GPIB interface
The GPIB card shall be labeled by National Instruments or at least compatible with their
products.
Drivers must be installed and card <accepted> by Phoenix. The following procedure has
to be made once for <acceptance> :
Select Tools Alt-T
Options Alt-O
GPIB card Alt-G
The window <GPIB Card> pops up.
Select Card Type: NI
Press Start and wait until the <listeners> (radio communication tester) are identified,
then press Close.
The identification may take a few minutes.