User Guide

Nokia Custome Care Service Sofftware and Tuning Instructions
RH-37
Issue 1 07/04 Nokia Corporation Page 63
Select RF Controls
Operation Mode Burst
RX/TX Channel 37
TX Data Type All1
TX Power Level 5
The setup should now look like this:
Note: Dependent on the Phoenix version also VBAT value is not displayed
The power levels during TxIQ are adjusted automatically. An explicit selection of power level with
RfControls is not necessary.
Connect a spectrum analyzer or GSM tester with the option 'Narrow Spectrum' to the
antenna pads of the phone.