User Guide

Nokia Customer Care 6(b) - RF Troubleshooting Instructions
RH-37
Issue 1 07/04 Nokia Corporation Page 21
P
out
= +23dBm @ 897.4 MHz
If this is not the case, go to the GMSK fault finding chart for the GSM900 transmitter.
EDGE
Set operating mode to local mode.
Select Testing RF Controls
Wait until the RF Controls window pops up.
Select Band GSM 900
Active unit TX
Operation mode Burst
RX/TX Channel 37
TX Power Level 10
TX Data Type All1
Edge On
The setup should now look like this: