User Guide

Nokia Customer Care System Module
RH-37
Issue 1 07/04 Nokia Corporation Page 45
Battery connector (X2000)
There are also some corner marks introduced in order to support placement of the con-
nector and checking placement after rework.
X-press on grip LED’s (V2402, V2403, V2404, V2405, V2406, V2407)
When X-press on grip LED’s are exchanged, it must be checked that they are installed
within the PWB outline in order to avoid mechanical shocks from the X-press on grip
mechanics. Therefore, they must not trespass the ‘golden line’. In the picture below,
tweezers are used to make the distance to the PWB outline visible.
LED glass may
not reach the
‚golden line‘
Tweezers as tool
to check
LED glass may
not reach the
‚golden line‘
Tweezers as tool
to check