User Guide

PAMS
Technical Documentation
NSE 8/9
Service Software Instructions
Page 65
Issue 1 07/99
Flash Phone... command
Activation Status Bar Text
Alt, S,F
This command is used for flashing new software into the phone. Function
opens the following Flash Phone dialog box. When flashing is started, a
window will show status and progress.
Flashing the phone supports both the FPS4 flash prommer setup and the
FLS–X device. The device used is selected in the menu Configure |
FLS–1. If Use FLS–X is checked then the FLS–X device is activated or
else is the FPS4 prommer activated.
Both the image file and the PPM file are flashed to the phone. The files to
be used are defined for each market area in the ini–file
wintesla\nse–8\nse–8.ini. This ini–file is maintained by phone software
installation packages.