User Guide

CC Technical Documentation Troubleshooting - RF (Part 2)
RM-11
Issue 1 02/2004 ©2004 Nokia Corporation Confidential Page 19
Turning on Rx Path Using Phoenix
1. Turn on Receiver Only in CDMA Mode.
2. Set to RX mode, and set the band and channel to the following values:
• PCS CH = 600, RX = 1960MHz
• CELL CH = 384, RX = 881.52MHz
• AMPS CH = 384, RX = 881.52MHz
Figure 24: Phone Control dialog box