CC Technical Documentation RM-11 Series Transceivers Service Tools Issue 1 02/2004 Confidential ©2004 Nokia Corporation
RM-11 Service Tools CC Technical Documentation Contents Page Model 3205 Service Tools ............................................................................................. 3 Flashing and Testing Setups ........................................................................................8 Flashing, Testing, and Tuning with Covers On ...........................................................8 Service Setup 1.......................................................................................
RM-11 Service Tools CC Technical Documentation Model 3205 Service Tools JBV-1 Docking Station DA-12 Docking Station Adapter 0770298 0770603 The Docking Station and the Docking Station Adapter are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. The Docking Station can be powered by FPS-8 or external power supply. The flash adapter allows FBUS/MBUS connections for flashing.
RM-11 Service Tools CC Technical Documentation JSX-1A Shield Box DKU-5F Flash Cable 0770346 0780738 The Shield Box allows RF radiated tests and antenna testing. Contact the Americas AMS in Melbourne, FL for more information on how to obtain one. For use with the Spirent UPST and UMPP service software. Note: The cable cannot be used as a straight through USB connection cable.
RM-11 Service Tools CC Technical Documentation XCS-4 Mbus/Fbus Cable CA-5S DC Service Cable 0730178 0730283 XCS-4 Service Cable is a modular cable for flashing DCT4 products. The DC Service Cable (CA-5S) connects the docking station (JBV-1) to the charger connection (Vin) of the phone to conduct EM calibration. Note: CA-5S replaces the SCB-3 cable (0730114).
RM-11 Service Tools CC Technical Documentation FLS-4S POS Flash Dongle DAU-9T FBUS Data Cable 0080543 0730267 The Point of Sale (POS) flash is a low-cost software upgrade tool. This requires XCS-1 cable and ACF-8 for operation. FBUS cable DAU-9T provides a connection from the serial port of the computer to the system connector of the phone. DAU-9S Cable CA-25RS RF Test Probe 0730108 0730316 This is a general-purpose cable to support F / MBUS communication between a Mod-10 device and a PC.
RM-11 Service Tools CC Technical Documentation CA-22DS Service Connector MJ-18 Module Jig 0730311 0770599 This cable is used with FLS-4S or FLC-20 for bottomconnector flashing. This jig allows phone PWB-level service and troubleshooting for authorized service centers. PKD-1 SW Security Device SRT-10 Camera Removal Tool 0750018 0770666 SW security device (PKD-1) is a hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of service software.
RM-11 Service Tools CC Technical Documentation Flashing and Testing Setups POS Flash Setup 1 FLC-20 and CA-22DS POS Flash Setup 2 DKU-5F POS Flash Setup 3 FLS-4S and CA-22DS Service Center Flash Setup 4 FPS-8 prommer, JBV-1, and DA-12 Flashing, Testing, and Tuning with Covers On Tightened performance specifications require more precise equipment and methods for testing and alignment. Manual tuning ca not provide accurate results for the RM-11, which means that this test has to be automated.
RM-11 Service Tools CC Technical Documentation Service Setup 1 7 8 6 5 5 4 3 2 1 Issue 1 02/2004 Item Name Type Code 1 Docking Station JBV-1 0770298 2 Docking Station Adapter DA-12 0770603 3 DC Power Cable PCS-1 0770012 4 Modular Cable XCS-4 0730178 5 Flash Prommer Box FPS-8 0080321 6 Printer Cable (included with FPS-8) CA-10DS 0730298 7 D9-D9 Cable (included with FPS-8) AXS-4 0730090 8 SW Protection Key PKD-1 0750018 9 AC Charger ACP-8F 0680032 ©2004 Nokia Corp
RM-11 Service Tools CC Technical Documentation Service Setup 2 5 2 1 4 3 Page 10 Item Name Type Code 1 Module Jig MJ-18 0770599 2 DC Power Cable PCS-1 0730012 3 RF Antenna Cable XRS-6 0730231 4 Service MBUS Cable DAU-9S 0730108 5 SW Protection Key PKD-1 0750018 ©2004 Nokia Corporation Confidential Issue 1 02/2004
RM-11 Service Tools CC Technical Documentation Service Setup 3 7 4 6 3 5 1 Issue 1 02/2004 2 Item Name Type Code 1 Docking Station JBV-1 0770298 2 Docking Station Adapter DA-12 0770603 3 DC Service Cable CA-5S 0730283 4 RF Antenna Cable XRS-6 0730231 5 DC Power Cable PCS-1 0730012 6 Service MBUS Cable DAU-9S 0730108 7 SW Protection Key PKD-1 0750018 ©2004 Nokia Corporation Confidential Page 11
RM-11 Service Tools CC Technical Documentation Automated Tuning and Alignment This setup is used for tuning of the handset at Nokia Authorized Service Centers. JBV-1 + DA-12 Figure 1: Tuning and alignment diagram Use the following equipment for automated tuning and alignment. Note: A Test Sequence File is required to perform “Auto tune” on this phone. In addition, Phoenix needs to have the Auto Tune function installed. Consult your local Nokia After Market Services office more information.
RM-11 Service Tools CC Technical Documentation Table 1: Automated tuning and alignment equipment list (Continued) Item Name MFR Model # QTY Comment 7 Docking Station Nokia JBV-1 1 Consult your local Nokia After Market Services office for more information 8 RF Switches Green Hill TVi9901 1 Consult your local Nokia After Market Services office for more information GPS Testing Engine Use this setup for testing the GPS engine at Nokia Authorized Service Centers.
RM-11 Service Tools CC Technical Documentation Figure 3: GPS radiated testing GPS Testing Equipment • Power Supply Page 14 • Signal Generator up to 2 GHz • Computer (Pentium 3, W2000) • JBV-1 Docking Station • DA-12 Docking Station Adaptor • PCS-1 DC Power Cable • DAU-9S M/F-Bus Cable • RF Test Cables (for GPS RF Port) • Latest Release Phoenix AMS version w/ GPS Test Component ©2004 Nokia Corporation Confidential Issue 1 02/2004