User Guide

CC Technical Documentation Service Software Instructions

RM-11

3. Choose one of the following on the Select mode dialog box:

• Select Wizard, which allows Phoenix to auto-detect your connection config-

uration.

• Select Manual, which allows you to manually select options to create the

connection.

Figure 5: Select Mode dialog box

4. Once a connection is defined, make sure that the connection you want to use

appears at the top of the list. If it does not, use the up and down arrows on the

Manage Connections dialog box to move the connection to the top, and click

the Apply button.

5. Close the window when you are finished.

You can now proceed with the normal initiation of a session by selecting a

product or scanning for a product.

Scanning for a Product

Many features of this program are product-specific. Therefore it is necessary to configure

Phoenix for the product on which you will be working at the beginning of the session.

Choose Scan Product from the drop-down menu list and Phoenix automatically scans

for the product and selects the necessary configurations. The status bar at the bottom

indicates if the product was found and its type.

Using Components

When working with Phoenix, tasks are generally managed by specific software

components. From the menu, select the desired component or task to be performed.

“Opening a component” is defined as opening a tool window within Phoenix. When this

window is opened, Phoenix also opens a toolbar for it and adds component-specific

menu items in the Window menu.