User Guide

CC Technical Documentation Service Software Instructions
RM-11
Issue 1 02/2004 ©2004 Nokia Corporation Confidential Page 13
5. Click the OK button.
Figure 10: Serial Port tab on the Settings dialog box
6. You can now proceed with the normal initiation of a session.
Scanning for a Product
Many features of this program are product specific. Therefore, it is necessary to
configure Diego at the beginning of the session for the product on which you will be
working.
Scanning of the product can be done manually or automatically. The default setting is
automatic scanning. In automatic scan mode, Diego automatically scans for a product at
a periodic rate. The default rate is every 5 seconds, but you can change to a different
frequency in the setup menu.
You can change the scan setting to manual scanning on the General tab on the Settings
dialog box. To manually scan for a product, click the “Connect” icon.
Using Components
When working with Diego, tasks are generally managed by specific software
components. Select the desired component or "task" to be performed from the icons
displayed in the pane on the left side of the window.
Opening a component refers to opening a tool window within Diego. When this window
is opened, Diego also opens a task box, which includes component-specific menu items.