User Guide

RM-11
Service Software Instructions CC Technical Documentation
Page 12 ©2004 Nokia Corporation Confidential Issue 1 02/2004
Use the following steps to select a port:
1. Select “My Computer” desktop icon, and click the “FLS Virtual Port” icon.
Figure 8: The FLS Virtual Port icon
2. Make note of the value in the Virtual Port Assignment field (COM 2 in this
example).
3. Click Add to create a new connection.
Figure 9: diego - Phone Settings dialog box
4. Select the Virtual COM port setting.
Note: COM port settings can only be entered or
changed if the auto-connection feature of Diego is
disabled (as indicated by the grey Status box).
To disable the auto-connect, click on this icon (cir-
cled below) in the toolbar.).