CC Technical Documentation RM-11 Series Transceivers Service Software Instructions Issue 1 02/2004 Confidential ©2004 Nokia Corporation
RM-11 Service Software Instructions CC Technical Documentation Contents Page Phoenix User’s Guide .................................................................................................... 3 Introduction ..................................................................................................................3 General Setup Procedure........................................................................................... 3 Hardware Requirements for Using Phoenix......................
CC Technical Documentation RM-11 Service Software Instructions Phoenix User’s Guide Figure 1: Phoenix introduction screen Introduction This section briefly describes how to install Phoenix and includes some basic information on how to use the program. More detailed information can be found in the Phoenix Help files. Each feature in Phoenix has its own Help file, which can be activated while running Phoenix.
RM-11 Service Software Instructions CC Technical Documentation The installation process requires that you reboot the computer after installing the software. Phoenix is not usable until a reboot is completed. After the reboot, the Phoenix icon appears on the desktop. Double-click this icon to start the program.
CC Technical Documentation RM-11 Service Software Instructions Installation Instructions Use the following steps to install Phoenix: 1. Insert the CD into the computer. 2. Navigate to the CD-ROM drive, and double-click the Phoenix software package. 3. Follow the on-screen prompts. 4. Reboot the computer when the installation is complete. Software Support Bundles The Phoenix installation is auto-executable.
RM-11 Service Software Instructions CC Technical Documentation Initial Session with Phoenix It is necessary to create a connection the first time you use Phoenix. Use the following steps to create a connection: 1. Open the File menu and select Manage Connections. Figure 3: File Menu with the Manage Connections option 2. Click the Add button to create a new connection.
RM-11 Service Software Instructions CC Technical Documentation 3. Choose one of the following on the Select mode dialog box: • Select Wizard, which allows Phoenix to auto-detect your connection configuration. • Select Manual, which allows you to manually select options to create the connection. Figure 5: Select Mode dialog box 4. Once a connection is defined, make sure that the connection you want to use appears at the top of the list.
RM-11 Service Software Instructions CC Technical Documentation Using Profiles Phoenix’s Profile feature allows product, connection, and currently open components to be stored into permanent storage by creating a profile file with a name of your choice followed by an .nmp file extension for later retrieval. Saved profiles makes it easy to configure Phoenix into a desired configuration with favorite windows already opened and ready to go.
RM-11 Service Software Instructions CC Technical Documentation Diego User’s Guide Figure 6: Diego introduction screen Introduction Diego was designed as an easy to use, minimal decision-making application for point of sale locations. This section briefly describes how to install Diego and includes some basic information about how to use the program. See the Diego Help files for more detailed information.
RM-11 Service Software Instructions CC Technical Documentation Hardware Requirements Table 3: Minimum hardware requirements Hardware Minimum Value Processor 233 MHz RAM1 64 MB Disk space needed 50-100 MB Table 4: Supported operating system information Operating System Notes Windows 98 SE only Windows NT 4.
CC Technical Documentation RM-11 Service Software Instructions Software Support Bundles The Diego installation program is a generic software load. In order to support specific custom transceivers (customer-specific phone models), it is necessary to also obtain Software Support Bundles. These bundles are created by Nokia Customer Care (CC) and made available by Nokia After Market Services (AMS) for the Americas region on the Partners Web Page (http://americas.partners.nokia.com).
RM-11 Service Software Instructions CC Technical Documentation Use the following steps to select a port: 1. Select “My Computer” desktop icon, and click the “FLS Virtual Port” icon. Figure 8: The FLS Virtual Port icon 2. Make note of the value in the Virtual Port Assignment field (COM 2 in this example). 3. Click Add to create a new connection. Note: COM port settings can only be entered or changed if the auto-connection feature of Diego is disabled (as indicated by the grey Status box).
CC Technical Documentation RM-11 Service Software Instructions 5. Click the OK button. Figure 10: Serial Port tab on the Settings dialog box 6. You can now proceed with the normal initiation of a session. Scanning for a Product Many features of this program are product specific. Therefore, it is necessary to configure Diego at the beginning of the session for the product on which you will be working. Scanning of the product can be done manually or automatically.
RM-11 Service Software Instructions CC Technical Documentation Uninstalling Diego As mentioned in the "Installing Diego" section, it may be necessary to remove a previous version of Diego. Follow the uninstall procedure with care. Note: Failure to remove the program properly causes a misconfiguration of the computer's registry. Uninstalling a Diego Version Use the following steps to uninstall a previous version of Diego: 1.
