User Guide

RM-11
Troubleshooting - RF (Part 1) CC Technical Documentation
Page 8 ©2004 Nokia Corporation Confidential Issue 1 02/2004
2. Select Cell (CDMA) in the Band field, and Rx/Tx (Tx path enabled) in the Mode
field on the RF Main Mode dialog box.
Figure 10: RF Main Mode dialog box
3. Select the Rho ON check box in the State area on the CDMA Control dialog box.
Figure 11: CDMA Control dialog box
4. Adjust the three Tx AGC settings for the proper output power level on the RF
PDM dialog box.
Figure 12: RF PDM dialog box