User Guide

RH-30/RH-31 Company Confidential
Service Tools Nokia Customer Care
Page 4 © 2004 Nokia Corporation. Issue 2 11/2004
MJS-38 Module Test Jig
Module Test Jig MJS-38 is designed for regional Central Services for 1bj module testing.
It can be used for flashing and RF-, battery-, system-, radio- and SIM reader testing.
Product code
MJS-38 Module Test Jig: 0770416
View of MJS-38
Note: The nominal supply voltage for MJS-38 is +4.2 V.
The supply voltage must not exceed +5.0 V (min 3V).
(MJS-38 includes overvoltage, overcurrent and reversed polarity protection).
For flashing with FPS-8, it is possible to bypass the regulator
(jumper).