User Guide

DTX-3
Service Software CCS Technical Documentation
Page 10 Nokia Corporation. Draft 2 3/03
SW version
The SW version is shown same way as in N22 service application.
PSN
The electrical serial number can be read same way as in N22 service application.
Manufacture date
This information is set by manufacturing site. Date should be stated in format YYYY-MM-
DD. It is essential for warranty period information.
HW version
The HW version is shown same way as in N22 service application.
Default factory values
Figure 1: Choose Software -> Set Factory Values
This command is used for re-setting factory values to the EEPROM of the Application
Module.