User Guide

CCS Technical Documentation Modules
DTX-3
Issue 1 4/03 Nokia Mobile Phones Ltd. Page 9
Table 4: Nokia 32 button sequences used in trunk mode.
Sequence Functionality Response
PIN# PIN code input Tone
PUK# PUK code input Tone
0**value Volume control, louder. ‘Value’ from 1 to 10. Tone
555**# System reset Tone
CONFIGURATION STATE
**####** Configuration state Tone / Light indication
Acces code query state PIN Query tone and light
1234# Acces code enter. Default acces code. Acces code can
be changed or query can be disabled
Tone / Light indication
2**XXXX# XXXX = interruption time in milliseconds. XXXX= 0 =
LI disabled. Default 400ms. Back to configuration
state
Tone / Light indication
3**XXXX# XXXX = Reversal time in milliseconds
(999 => polarity reversed whole call time)
Tone / Light indication
4# Entry code to CLI mode changing Query state flashing
4**XXX# XXX=
000 = ETSI FSK (default)
001 = DTMF
010 = DTMF_DK
111 = None
Tone / Light indication
5# Entry code to operator selection. If roaming user can
select the operator entering operator code. If 000
operator will be selected automatically.
Query state flashing
5**XXX# XXX = operator number
000 = default (automatic selection)
Network searching. Tone and
light indication about the
succes.
5# Entry code to …
444*OLD PIN*NEW PIN# Change PIN code Tone / Light indication
888*OPERATOR CODE# Change Operator if roaming Tone / Light indication