User Guide

Messages
34
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Menu > Messages > Voice messages > Listen to voice messages to dial the voice
mailbox number. When you connect and the prerecorded greeting begins, follow
the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string. See "Phone numbers with dialing codes," p. 34.
Voice mail services vary by wireless service provider. The following instructions
are examples of common operations. Please check with your wireless service
provider for specific instructions on using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look similar to
the following:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
and press #.
Phone numbers with dialing codes
Dialing codes instruct the receiving system to pause, wait, bypass, or accept
the numbers that follow them in the dialing string. To set up dialing codes,
do the following:
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an (empty) 1-touch dialing slot, and select Assign.
3. Enter your mailbox phone number, including the area code.
4. Enter any dialing codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.