User Guide

Steps

1. Set the phone to local mode.

2. Activate RSSI reading in Phoenix (Testing→GSM→RSSI reading )

Results

The reading should reflect the level of the signal generator (-losses) +/- 5 dB.

When varying the level in the range -30 to -102 dBm the reading should then follow within +/-5 dB.

WCDMA RX chain activation for manual measurement/WCDMA RSSI measurement

Prerequisites

Make the following settings in Phoenix service software and in the signal generator.

Setting Band I

Phoenix channel 10700

Signal generator to antenna connector 2141.0 MHz

Steps

1. Via Phoenix Testing menu, choose WCDMA/RX Control.

2. In the RX control window, make the following settings:

RM-364

RF troubleshooting

Page 4 –12 COMPANY CONFIDENTIAL Issue 1