CCS Technical Documentation RH-48 Series Transceivers Service Tools Issue 1 11/2003 Confidential ©2003 Nokia Corporation
RH-48 Service Tools CCS Technical Documentation Contents Page No Model 3105 Service Tools ............................................................................................. 3 Flashing, Testing, and Tuning .....................................................................................8 Point of Sales Flashing.............................................................................................. 9 Flash Programming Using Docking Station (JBV-1 and MJF-17) .........................
RH-48 Service Tools CCS Technical Documentation Model 3105 Service Tools JBV-1 Docking Station MJF-17 Docking Station Adapter 0770298 0774282 The Docking Station and the Docking Station Adapter are needed for Mbus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by FPS-8 or external power supply.
RH-48 Service Tools CCS Technical Documentation JXS-1 Shield Box DKU-5F Flash Cable 0770346 0780738 The Shield Box allows RF radiated tests and antenna testing. Contact the Americas AMS in Melbourne, FL for more information on how to obtain one. For use with the Spirent UPST and UMPP service software. Note: The cable cannot be used as a straight through USB connection cable.
RH-48 Service Tools CCS Technical Documentation XCS-4 General Purpose Cable CA-5S DC Service Cable 0730178 0730283 XCS-4 Service Cable is a modular cable for flashing DCT4 products. The DC Service Cable (CA-5S) connects the docking station (JBV-1) to the charger connection (Vin) of the phone to conduct EM calibration. Note: CA-5S replaces the SCB-3 cable (0730114).
RH-48 Service Tools CCS Technical Documentation FLS-4S POS Flash Dongle DAU-9T MBUS Data Cable 0080543 0730267 The Point of Sale (POS) flash is a low-cost software upgrade tool. This requires XCS-1 cable and ACF-8 for operation. FBUS cable DAU-9T provides a connection from the serial port of the computer to the system connector of the phone. DAU-9S (MBUS) Cable CA-25RS RF Test Cable 0730108 0730316 DAU-9S is a general-purpose communications cable.
RH-48 Service Tools CCS Technical Documentation CA-22DS Service Cable MJ-23 Module Test Jig 0730311 0770650 This cable is used for bottom connector flashing using FLS-4S or FLC-20. This jig allows phone PWB-level service and troubleshooting for authorized service centers. PKD-1 SW Security Device FLA-30 Flash Adapter 0750018 0770472 SW security device (PKD-1) is a hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of service software.
RH-48 Service Tools CCS Technical Documentation SS-13 Tuning Docking Station (CDMA) XRS-6 RF Test Cable 0080852 0730231 SS-13 is used with the MJF-x/DA-x flashing adapters (shown with MJF-17). This is a general-purpose RF cable. Flashing, Testing, and Tuning Tightened performance specifications require more precise equipment and methods for testing and alignment. Manual tuning can’t provide accurate results for the RH-48, which means that this test has to be automated.
RH-48 Service Tools CCS Technical Documentation Point of Sales Flashing Z Service Software X Y Item Name Type Code 1 FLS-4S flash device (sales pack) (ACF-8 power supply is included in the FLS-4S sale pack) FLS-4S 0080543 2 Service cable CA-22DS 0730311 3 Point-of-sale service software Diego Phoenix 8405139 8407840 DKU-5F FLC-20 0080738 0081544 NOTE Issue 1 11/2003 Other POS flashing configurations available: USB single-flash cable (DCT4 only) USB flash cable for DCT3/DCT4 handsets
RH-48 Service Tools CCS Technical Documentation Flash Programming Using Docking Station (JBV-1 and MJF-17) X Z [ \ Y Item Type Code Flash prommer box (sales pack) Included in FPS-8 sales pack: Service cable Serial cable Power supply FPS-8 0080321 CA-10DS AXS-4 ACF-8 0730298 0730090 0680032 2 Docking station JBV-1 0770298 3 Docking adapter MJF-17 0774282 4 DC power cable PCS-1 0730012 5 Modular cable XCS-4 0730178 Software protection key (not shown) PKD-1 0750018 Service sof
RH-48 Service Tools CCS Technical Documentation Covers-Off Troubleshooting Using Service Jig (MJ-23) Item Name Type Code 1 Module repair jig includes RF test cable MJ-23 CA-25RS 0770650 0730316 2 DC power cable PCS-1 0730012 3 RF test cable XRS-6 0730231 4 Service MBUS/FBUS cable DAU-9S 0730108 5 Software protection key PKD-1 0750018 Service software (not shown) Phoenix 8407840 Issue 1 11/2003 Confidential ©2003 Nokia Corporation Page 11
RH-48 Service Tools CCS Technical Documentation Automated Tuning and Alignment This setup is used for tuning of the handset at Nokia Authorized Service Centers..
RH-48 Service Tools CCS Technical Documentation Automated Tuning and Alignment Equipment List Item Name MFR Model # QTY Comment 1 Vector Signal Analyzer Agilent E4406A 1 2 Signal Generator Agilent E4421B 1 3 RF Series GreenHill TVi9901 1 4 Power Supply Keithly K2306 2 5 Win2000 PC 6 NI-GPIB Interface NI GPIB-USB-A 2 USB to GPIB adapter (184983G01) 7 Docking Station Nokia SS-13 1 For DCT4 handset tuning. SS-13 is specifically designed for CDMA RF tuning.
RH-48 Service Tools Page 14 CCS Technical Documentation ©2003 Nokia Corporation Confidential Issue 1 11/2003
