CCS Technical Documentation RH-48 Series Transceivers Service Software Instructions Issue 1 11/2003 Confidential ©2003 Nokia Corporation
RH-48 Service Software Instructions CCS Technical Documentation Contents Page No Phoenix User’s Guide .................................................................................................... 3 Introduction ..................................................................................................................3 General Setup Procedure ........................................................................................... 3 Hardware Requirements for using Phoenix ..................
CCS Technical Documentation RH-48 Service Software Instructions Phoenix User’s Guide Introduction This section briefly describes how to install Phoenix and includes some basic information on how to use the program. More detailed information can be found in the Phoenix Help files. Each feature in Phoenix has its own Help file, which can be activated whil running Phoenix. To activate a Help file while Phoenix is running, press the F1 key or the specific feature’s Help button.
RH-48 Service Software Instructions CCS Technical Documentation Hardware Requirements for using Phoenix Minimum Hardware Requirements Processor 233 MHz RAM1 64 MB Disk space needed 50-100 MB Supported Operating Systems Windows 95 Notes Limited, no USB support Windows 98 Windows NT 4.
RH-48 Service Software Instructions CCS Technical Documentation to load software upgrade files to customer-specific phone models. These bundles are created by CCS and made available by AMS on the Partners Web Page http://americas.partners.nokia.com. This web page is password-controlled; if you have not registered as a user, contact Nokia Central Service in Melbourne, Florida. Similar to the Phoenix installation, these Software Support Bundles are InstallShield executable packages.
RH-48 Service Software Instructions CCS Technical Documentation Next click the Add… button to create a new connection. When the Select Mode dialog box appears, you may then select either Wizard, which will auto-detect your connection configuration, or Manual, which allows you to manually select options to create the connection. Once a connection is defined, make sure that the one to be used is moved to the top of the list (use the up down arrows on the Manage Connections dialog box.
RH-48 Service Software Instructions CCS Technical Documentation at the bottom will indicate if the product was found and its type. Using Components When working with Phoenix, tasks are generally managed by specific software components. From the menu, select the desired component or task to be performed. “Opening a component” is defined as opening a tool window within Phoenix. When this window is opened, Phoenix also opens a toolbar for it and adds component-specific menu items in the Window menu.
RH-48 Service Software Instructions CCS Technical Documentation Diego User’s Guide Introduction This section briefly describes how to install Diego and includes some basic information on how to use the program. More detailed information can be found in the Diego Help files. Each feature in Diego has its own Help file, which can be activated while running Diego. To activate a Help file while Diego is running, press the F1 key or the specific feature’s Help button.
RH-48 Service Software Instructions CCS Technical Documentation Hardware Requirements for using Diego Minimum Hardware Requirements Processor 233 MHz RAM1 64 MB Disk space needed 50-100 MB Supported Operating Systems Windows 95 Notes Limited, no USB support Windows 98 Windows NT 4.
RH-48 Service Software Instructions CCS Technical Documentation Note that rebooting the computer will be necessary when completed. Software Support Bundles The Diego installation is auto-executable. You must obtain Software Support Bundles to load software upgrade files to customer-specific models. These bundles are created by CCS and made available by AMS on the Partners Web Page http://americas.partners.nokia.com .
RH-48 Service Software Instructions CCS Technical Documentation Select “My Computer” desktop icon and click on the “FLS Virtual Port” icon. Make note of the Virtual Port Assignment (COM 2 in this example). Next select “Add…” to create a new connection. Note: COM port settings can only be entered or changed if the auto-connection feature of Diego is disable (as indicated by the grey Status box).
RH-48 Service Software Instructions CCS Technical Documentation Select the Virtual COM port setting. Then press the Apply button. You can now proceed with the normal initiation of a session. Scanning for a Product Many features of this program are product-specific. Therefore, it is necessary to configure Diego at the beginning of a session for the product on which you will be working. Scanning of the product can be done manually or automatically. The default setting is automatic.
RH-48 Service Software Instructions CCS Technical Documentation Uninstalling Diego version • Go to the computer’s “Control Panel”, selectable from the Start button or the “My Computer” desktop icon. • Select “Add/Remove Programs” icon. • Select the Diego version to be removed, and click the Add/Remove button. • Click on the OK button to begin the process of removal. • Follow the on-screen instructions. Be sure to reboot the computer when finished.
RH-48 Service Software Instructions Page 14 ©2003 Nokia Corporation CCS Technical Documentation Confidential Issue 1 11/2003
