User Guide

CCS Technical Documentation Troubleshooting - RF

RH-48

9 Enter 10, 13, 12, and 8 in the PIN # fields.

Figure 6: General I/O dialog box for Tx troubleshooting

10 Select the boxes in the Enable column for each pin.

11 Click the Get All button.

12 Ensure that all of the pins have a value of H in the State column. (Click the L val-

ues to change them to H values.)

13 Adjust the following PDM field values on the RF PDM dialog box:

• Tx IF AGC = -280

• Tx RF AGC = -280