User Guide

CCS Technical Documentation Troubleshooting - RF
RH-48
Issue 1 11/2003 © 2003 Nokia Corporation Confidential Page 7
Cell Transmitter Setup
Use the following steps to set up the phone for Tx troubleshooting in Phoenix.
1Open the Phone Control dialog box.
Figure 3: Phone Control dialog box for Tx troubleshooting
2 Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3 Select the following values on the RF Main Mode dialog box:
• Band = Cell (CDMA)
• Channel = 384
• Mode = Rx/Tx
Figure 4: RF Main Mode dialog box for Tx troubleshooting